Download  Print this page

Copying A Day - Honeywell CHRONOTHERM T8600D Product Data

Deluxe programmable thermostats
Hide thumbs

Advertisement

T8600D, T8601D AND T8602D CHRONOTHERM
Period
Start Time
Sunday
Wake
[6:00 AM]
Leave
[8:00 AM]
Return [6:00 PM]
Sleep
[10:00 PM]
2. Press Day until the desired day is displayed.
Time
Set Program
Run
Set Current
Wake
Leave
Return
Program
Day/Time
Day
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
3. Press Time
or Time
displayed.
NOTE: The program times are in fifteen minute
intervals. (Example: 8:00, 8:15, 8:30).
Time
Time
Set Program
Run
Set Current
Wake
Leave
Return
Program
Day/Time
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
4. Press increase
or decrease
Wake temperature is displayed.
NOTE: The setpoint temperature range is 40 to 90°F
(7 to 31°C) for heating and 45 to 99°F (9 to
37°C) for cooling.
Time
Set Program
Set Current
Run
Wake
Leave
Return
Sleep
Program
Day/Time
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
NOTE: Press Fan to modify fan operation. Auto means
the fan will run only when the heating or
cooling equipment is operating. On means the
fan will run continuously for the entire period.
5. Press Heat/Cool Settings to switch to other system
temperature setpoint.
NOTE: The program times are the same for both
heating and cooling.
Heat/Cool
Time
Set Program
Run
Set Current
Wake
Leave
Return
Program
Day/Time
Settings
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
®
Table 9. Default Time, Setpoints and Fan Settings (continued).
Heat Setpoint
[70°F (21°C)]
[62°F (16.5°C)]
[70°F (21°C)]
[62°F (16.5°C)]
Set Program
Start Time
Setting
AM
Mon
Heat
Sleep
Wake
System
Fan
Fan
Heat
Auto
M10318
until the desired Wake time is
Set Program
Start Time
Setting
AM
Mon
Heat
Sleep
Wake
System
Fan
Fan
Heat
Auto
M10319
key until the desired
Set Program
Start Time
Setting
AM
Mon
Heat
Wake
System
Fan
Fan
Heat
Auto
M10320
Setting
Set Program
Start Time
AM
Mon
Cool
Sleep
Wake
System
Fan
Fan
Heat
Auto
M10321
IV DELUXE PROGRAMMABLE THERMOSTATS
Cool Setpoint
[78°F (25.5°C)]
[85°F (29.5°C)]
[78°F (25.5°C)]
[82°F (28°C)]
6. Press increase
temperature setpoint is displayed.
Time
Run
Set Current
Program
Day/Time
Hold Temp
Day
Daylight
Copy
Time
7. Press Leave, Return or Sleep and repeat steps 3, 4, 5
and 5 for programming the rest of the day. The first day
is now programmed.
IMPORTANT
Repeat steps 1 through 7 for each day of the week
that has a different program than the first day. Refer
to Copying a Day section to copy any program day to
another.
8. Press Run Program when all days are programmed.
Run
Run
Set Current
Program
Day/Time
Program
Hold Temp
Day
Daylight
Time

Copying a Day

NOTE: The thermostat must be in the program mode to use
the copy feature. Go to step 2 if the thermostat is
already in the program mode.
1. Press Wake.
Run
Set Current
Wake
Program
Day/Time
Hold Temp
Day
Daylight
Time
2. Press Day to select the day to be copied if different
from the day displayed.
Time
Run
Set Current
Program
Day/Time
Day
Hold Temp
Day
Daylight
Copy
Time
13
Fan Setting
[Auto]
[Auto]
[Auto]
[Auto]
or decrease
key until the desired
Set Program
Start Time
AM
Set Program
Mon
Leave
Wake
Return
Sleep
Wake
System
Heat/Cool
System
Fan
Settings
Heat
AM
Time
Set Program
Tue
Wake
Leave
Return
Sleep
Wake
Heat/Cool
System
DST
System
Fan
Settings
Heat
Copy
Set Program
Start Time
AM
Time
Set Program
Tue
Wake
Leave
Return
Sleep
Wake
System
Heat/Cool
System
Fan
Settings
Heat
Copy
Set Program
Start Time
AM
Set Program
Mon
Heat
Wake
Leave
Return
Sleep
Wake
Heat/Cool
System
System
Fan
Settings
Heat
Setting
Cool
Fan
Auto
M10322
Room
Fan
Auto
M10323
Setting
Heat
Fan
Auto
M10324
Setting
Fan
Auto
M10325
68-0164—1

Hide quick links:

Advertisement

loading

  Also See for Honeywell CHRONOTHERM T8600D

  Related Manuals for Honeywell CHRONOTHERM T8600D