Setting Fax Options - Kodak ESP Office 2100 Series Extended User Manual

Setting fax options

Before sending or receiving faxes, set up the fax options.
To set up fax options from the control panel:
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. Press or to select an option, then press
Fax Option
Fax Sender
Information
Rings to Answer
Redial if No Answer
Busy Redial
Attempts
www.kodak.com/go/aiosupport
KODAK ESP Office 2100 Series All-in-One Printer
Settings
--
1 to 6 (default is 4)
Yes (default) / No
0 to 12
(default is 5)
or to change the setting.
Description
This information appears on the faxes
you send.
Press OK , then enter the fax sender
name (your name), your fax number, and
your phone number (see
numeric keypad on the control panel to
enter text and/or numbers, page
press OK to save.
The number of times that your phone
will ring before the printer picks up the
call.
If you use a dedicated phone line for your
printer, set the Rings to Answer to any
setting. If the printer shares the phone
line with an answering machine, set the
Rings to Answer to a higher number (5
or 6) than the rings to answer for the
answering machine (typically 4 rings).
This allows the answering machine to
pick up phone calls. The printer will
monitor the line after the answering
machine picks up, and, if set to Auto
Answer, will detect an incoming fax and
receive it.
If the number you call is busy, the printer
will redial the number once
automatically.
The number of times that the fax will
attempt to redial a busy number.
Using the
70);
65