Table of Contents
Advertisement
Polyslider Washer
(A)
2-9:
PINCH ROLLER / CASSETTE OPENER
(Refer to Fig. 2-9)
Unlock the support 1.
1.
2.
Remove the Pinch Roller.
Remove the screw 2.
3.
Unlock the 2 supports 3.
4.
5.
Remove the Cassette Opener.
6.
Remove the Spring P5 and Arm P5 Ass'y.
Remove the Cam Gear, Polyslider Washer 4, Spring
7.
Cam Pinch and Cam Pinch Roller.
Remove the Polyslider Washer 5 and Cam P5.
8.
NOTES
1.
Do not touch the Pinch Roller. (Use gloves.)
2.
When installing the Cam P5, Cam Pinch Roller and
Cam Gear, align the timing marks.
DISASSEMBLY INSTRUCTIONS
Reel Disk S
Reel Disk T
Polyslider Washer
(A)
Fig. 2-8
Pinch Roller
Spring P5
Polyslider Washer
Cam P5
Arm P5 Ass'y
Cam P5
2-10: AUDIO CONTROL HEAD (Refer to Fig. 2-10)
1.
Disconnect the following connector: (CP4106) on the
Head Amp PCB.
Remove the 3 screws 1.
2.
3.
Remove the 3 Audio Control Head Springs.
4.
Remove the Audio Control Head.
NOTES
1.
Do not touch the head by any means when replacing
the Audio Control Head. (Use gloves.)
2.
After replacement, confirm the following adjustments.
a. MECHANICAL ADJUSTMENTS: ITEM 2-2
b. MECHANICAL ADJUSTMENTS: ITEM 2-3
B2-3
2
Cassette Opener
3
1
Spring Cam Pinch
Polyslider Washer
3
5
Cam Pinch Roller
Cam Gear
Cam Pinch Roller
Marker
4
Cam Gear
Fig. 2-9
Advertisement
Table of Contents
