ION iED004 Reference Manual page 12

2.3 PAGE 3: ENABLE CLICK (METRONOME) AND SET RHYTHM (CLICK SELECT)
The display shows CLICK SELECT; the Click window shows the click's rhythmic value.
Enter the click value with the INC/DEC or number buttons (1 = quarter note, 2 = quarter note
triplet, 3 = 8th note, 4 = 8th note triplet, 5 = 16th note, 6 = 16th note triplet, 7-0 = Click Off).
The click is audible only in Compose mode.
2.4 PAGE 4: SET CLICK (METRONOME) VOLUME (CLICK VOL)
The display shows CLICK VOL and a two-digit number representing click volume (00 =
inaudible, 99 = maximum volume). Enter the desired click level with the INC/DEC or number
buttons.
2.5 PAGE 5: ADD/REMOVE BEATS FROM PATTERN END (LENGTH)
This option either adds beats to, or subtracts beats from, the end of the Pattern. The Pattern
length can be set prior to, or after, recording. Shortening a Pattern's end point erases any
drum events that fall outside the remaining part of the Pattern; lengthening a Pattern's end
point adds silence at the end of a Pattern. It is also important to note that changing a Pattern's
length also changes the length of the associated Fill Pattern.
CLICK
SELECT
SETUP
RECORD
CLICK
10
PAGE