Swann PRO-series User Manual page 49

English
an adjustable iris. Also called an "aperture". Not all cameras
support this function.
Preset: A Preset is a position that the camera is in which is
saved to memory to be retrieved later.
Patrol: Initates patrol mode (also sometimes called "cruise"
mode). You'll need to define a series of Preset points for the
camera to patrol between.
Exit: Closes the PTZ controls.
PTZ Context Menu
Camera No: Switch quickly between cameras.
Call Preset: Returns the camera to a Preset point.
Call Patrol: Initiates a patrol of your choice.
Preset: Defines a Preset point.
Patrol: Initiates or stops a patrol.
PTZ Menu: Toggles the appearance of the PTZ Control Menu
onscreen. While the PTZ Control Menu is hidden, the DVR will
still be in PTZ mode, and the context menu can still be opened
via right-clicking the interface.
PTZ Settings: Opens the PTZ Settings menu, where you can
adjust the control method for the camera.
OSD Controls for Swann 700-series Cameras
If you're using one of Swann's PRO-700 series cameras (such
as the 760, 770 and so on) then you can use the DVR's PTZ
interface to control the camera's setting via the on-screen
display (OSD).
The steps to connect the camera's RS485 control wires to the
DVR are the same as connecting a PTZ device - see "Connecting
Additional Devices" on page 9.
Once the camera is connected, the following PTZ buttons will
control the camera:
IRIS +: Opens the camera's OSD and selects options.
Arrows: Navigates through the menu system.
49