Olympus SH-1 Instruction Manual page 67

For the operation method, refer to (P. 47).
d Settings Menu 3
Adjusting interval settings d [Interval Settings]
Submenu 2
Frame
Start Waiting Time
Interval Time
Designing type of level gauge display
d [Level Gauge Settings]
Submenu 2 Submenu 3
Off
Level Gauge
Display
On
Reset
Level Adjust
Adjust
Level gauge display
• Indicate the orientation of the camera. The "tilt"
direction is indicated on the vertical bar and the
"horizon" direction on the horizontal bar.
• Use the indicators on the level gauge as a guide.
• If the level gauge does not indicate the orientation
correctly, calibrate the angle of the level gauge.
1 to 99 (frames)
00 to 60 (minutes)
10/20/30/40/50 (sec.)/01 to 60 (minutes)
Hide level gauge.
Display level gauge.
Restore the factory default angle.
Set the virtual horizon to the camera's current
angle.
Submenu 3
Application
P P
250 F6.9 0.0 250 0.0
EN 67 67
EN