Olympus SH-1 Instruction Manual page 64

For the operation method, refer to (P. 47).
Turning on the camera with the q button d [q Power On]
Submenu 2
No
Yes
Selecting the camera sound and its volume d [Sound Settings]
Submenu 2
Sound Type
Volume
q Volume
Adjusting the image processing function d [Pixel Mapping]
• This function has already been adjusted at factory shipping, and no
adjustment is needed right after purchase. Approximately once a year is
recommended.
• For best results, wait at least one minute after taking or viewing pictures
before performing pixel mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function
Press the A button when [Start] (Submenu 2) is displayed.
• The check and adjustment of the image processing function starts.
d Settings Menu 2
Adjusting the brightness of the monitor d [s]
1 Use FG to adjust the brightness while viewing
the monitor, and then press the A button.
64 EN 64 EN
The camera is not turned on. To turn on the camera, press the
n button.
Press and hold the q button to turn the camera on in the
playback mode.
Submenu 3
Selects the camera sounds (operation sounds,
1/2/3
shutter sound, and warning sound).
0/1/2/3/4/5 Selects the operation volume of camera buttons.
0/1/2/3/4/5 Selects the image playback volume.
Application
Application
s
Back MENU