Olympus SH-1 Instruction Manual page 63

For the operation method, refer to (P. 47).
Using an Eye-Fi card d [Eye-Fi]
Submenu 2
All Transfers all images.
Sel. Image Transfers only selected image.
Off Disable Eye-Fi communication.
• When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully,
and comply with the instructions.
• Use the Eye-Fi card in compliance with the laws and regulations of the
country where the camera is used.
• In locations such as on an airplane, where the Eye-Fi communication is
prohibited, remove the Eye-Fi card from the camera, or set [Eye-Fi] to [Off].
• This camera does not support the Eye-Fi card's Endless mode.
Selecting a method for connecting the camera to other
devices d [USB Connection]
Submenu 2
Set to select the connection method each time the camera is
Auto
connected to another device.
Storage Connect camera as a card reader.
For Windows Vista/Windows 7/Windows 8/Windows 8.1, connect
MTP
camera as a portable device.
Print Select when connecting to a PictBridge-compatible printer.
• When using the supplied software, select [Storage].
• Refer to "Connecting the camera to a computer" (P. 80) for the connection
method with a computer.
Application
Application
EN 63 63
EN