Olympus SH-1 Instruction Manual page 53

For the operation method, refer to (P. 47).
Viewing the image immediately after shooting z [Rec View]
Submenu 2
The image being recorded is not displayed. This allows the user
Off to prepare for the next shot while following the subject in the
monitor after shooting.
The image being recorded is displayed for selected second(s).
1/2/3 (sec) This allows the user to make a brief check of the image that was
just taken.
Automatically rotating images shot with the camera in a
vertical position during playback z [Pic Orientation]
• During shooting, the [y] (P. 59) setting on the playback menu is set
automatically.
• This function may not work properly if the camera is facing up or down during
shooting.
Submenu 2
Information about the vertical/horizontal orientation of the
camera during shooting is not recorded with images. Images
Off
shot with the camera in a vertical position are not rotated during
playback.
Information about the vertical/horizontal orientation of the
On camera during shooting is recorded with images. Images are
automatically rotated during playback.
Imprinting the date of recording z [Date Stamp]
Submenu 2
Off Do not imprint the date.
On Stamp new photographs with the date of recording.
• When the date and time are not set, [Date Stamp] cannot be set.
g [X] (P. 65)
• The date stamp can not be deleted.
• You cannot set [Date Stamp] when drive settings are [  ], [  ], [ c ], and
[ d ], and the picture mode is except [Vivid], [Natural], and [Muted].
Application
Application
Application
EN 53 53
EN