Triangle V In The Display - Miele H 5140 BP Operating And Installation Instructions

Triangle V in the display

I60
% m
V
When a sensor is touched, the
symbols of functions which can be
altered will light up in the display.
These will vary depending on
programme.
Touch the V or W sensor repeatedly
until triangle V is underneath the
symbol of the required function.
Then select the function using the OK
sensor.
Triangle V will flash for approx.
15 seconds.
You can only make entries while
triangle V is flashing.
If the triangle has stopped flashing,
you will need to call the function up
again with the OK sensor.
Controls
19