Table of Contents
Related Manuals for Miele H 5460-BP
Summary of Contents for Miele H 5460-BP
-
Page 1: Operating And Installation Instructions
Operating and installation instructions Oven H 5360 BP, H 5460 BP en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. -
Page 2: Table Of Contents
Vented oven door ........ - Page 3 Pre-heating the oven ........
- Page 4 Oven interior ........... . . 43 Manual cleaning of the oven interior....... . . 43 Pyrolytic cleaning of the oven interior.
-
Page 5: Warning And Safety Instructions
Children's skin is far more sensitive to high temperatures than that of adults. External parts of the oven such as the door glass, control panel and the vent become quite hot. The oven door gets much hotter during pyrolytic operation than during normal use. - Page 6 Warning and Safety instructions Technical safety Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
-
Page 7: Correct Use
Miele replacement parts are used. If the supply cord is damaged, it must be replaced by a Miele approved service technician to avoid a hazard. This appliance may only be used in mobile installations such as ships, caravans, aircraft etc. - Page 8 Alcohol should be burnt off before the dish is placed in the oven to avoid this danger. Cover any food which is left in the oven to be kept hot. Any moisture in the food could lead to corrosion damage in the oven.
- Page 9 Due to the high temperatures radiated, objects near the appliance could catch fire. Accessories Only use genuine Miele spare parts and accessories with this appliance. If spare parts or accessories from other manufacturers are used, this will invalidate the guarantee, and Miele cannot accept liability.
-
Page 10: Caring For The Environment
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. -
Page 11: Guide To The Appliance
Guide to the appliance H 5360 BP, H 5460 BP Function selector, retractable when it is at "0" Display Sensors ?, OK, ;, Temperature selector, retractable Door lock for pyrolytic operation Top heat/grill element Back panel with air inlet for the fan Side runners with five shelf levels Connection socket for the food probe Door... -
Page 12: Features
The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or on the oven housing unit. Vented oven door The oven door is an open system and some of the door panes have a heat- reflecting coating. -
Page 13: Energy Saving Features
Time of day display The time of day display will go out after 60 seconds (default setting). When the oven is switched off, the display will not light up. The time of day will, however, continue to run unseen in the background (see "Settings - Time of... -
Page 14: Perfectclean Treated Surfaces
Accessories The following accessories are supplied with this oven. These and other accessories are also available to order from the Miele Spare Parts Department, your Dealer or via the internet at www.miele-shop.com. Baking tray, universal tray and rack with non-tip notches... -
Page 15: Anti-Splash Insert (Depending On Model)
The handle makes it easier to take the universal tray, baking tray and rack out of the oven, or to put them into it. The two prongs at the top go inside the tray or above the rack, and the U-shaped supports underneath. -
Page 16: Controls
Economy grill Pyrolytic: cleaning function Lighting: For switching on the oven light independently. This can be useful when cleaning the oven. It also works with the door removed. Settings: From this position, you can also alter the settings of the appliance. -
Page 17: Temperature Selector
Temperature selector The right-hand control V It can be turned clockwise or anti-clockwise. The temperature selector can be retracted in any position. Sensors The sensors underneath the display react to touch. A keypad tone sounds each time a sensor is touched. –... -
Page 18: Display
List of the Automatic programmes available. Please refer to the separate "User instructions" booklet supplied with your oven in addition to these Operating instructions for more information. ^ Use the ; or ? sensors to scroll through the list until the option you want is highlighted. - Page 19 Controls The following Symbols can appear in addition to the text: Symbol Meaning Duration Start time Finish Minute minder time Core temperature when using the food probe Arrows will appear if there are more than two options available. Use the ; or ? sensors to scroll through the list. The end of a list is indicated by a dotted line.
-
Page 20: Functions
Functions Your oven has a range of oven functions for preparing a wide variety of recipes. These include: Top heat/grill element (under the roof of the oven) Bottom heating element (under the floor of the oven) Ring heating element (behind the intake vent for the fan) - Page 21 Auto roast – For roasting. During the searing phase, the oven is heated up to a high temperature (230 °C) to sear the meat. Once this temperature has been reached, the temperature of the oven is automatically lowered to the set cooking temperature (continued roasting temperature).
-
Page 22: Before Using For The First Time
The time is only ever visible for 60 seconds. – Do not display: The display remains dark. ^ Use the ; or ? sensor to select the setting you want and confirm with the OK sensor. The oven is now ready for use.I... -
Page 23: Cleaning And Heating Up For The First Time
Doing this will dissipate the smells before you use it to cook food. ^ Before heating the oven up it is a good idea to wipe the interior out with a damp cloth. This way any dust or... -
Page 24: Automatic Programmes
The Automatic programmes available will appear when you select the "Auto- matic " function. A list will appear in the display. – Auto roast (oven function) – Slow cooking – Cakes – Baked goods – Bread – Bread mixes –... -
Page 25: Manual Operation
The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or on the oven housing unit. When the temperature in the oven has fallen sufficiently, the cooling fan will switch off automatically. -
Page 26: More About Manual Operation
More about manual operation Automatic switch-off can be selected when operating the oven manually. You can also adjust the heat-up phase and the humidity level inside the oven. To select a function ^ Select the required function. The function and recommended temperature are displayed. -
Page 27: Heating-Up Phase
More about manual operation Pre-heating the oven Most dishes can be placed in a cold oven. They will then make use of the heat produced during the heating-up phase. It is only necessary to pre-heat the oven in a few instances: With Fan plus –... -
Page 28: Entering The Duration, A Start Time Or Finish Time
– Duration When entering the Duration, you are entering the time that the food takes to cook. Once this time has elapsed, the oven heating switches off automatically. The maximum duration that can be entered is 9 hours 59 minutes. -
Page 29: To Use Automatic Switch-Off
30 minutes to cook, and needs to be ready at 12:15. Select Duration, and enter 0:30 h, or select Finish and enter 12:15. The oven will switch off automatically at the time set. More about manual operation Delaying the start with Automatic... -
Page 30: Sequence Of The Cooking Programme When Using Automatic Switch-Off
Buzzer tones"). After the programme has finished – The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. -
Page 31: Activating Moisture Reduction
For best results, activate it at the beginning of the cooking programme. ^ Place the food in the oven. ^ Select the required function and set the temperature. ^ Touch the OK sensor. The list of options will show in the display. -
Page 32: Minute Minder
Minute minder The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs. You can enter a time of up to a maximum of 9 hours and 59 minutes. You can set the minute minder at the same time as another timed programme, e.g. -
Page 33: Settings
Your appliance is supplied with a number of standard default settings. Settings cannot be altered while a cooking programme is in progress. To change a setting: ^ Select " Settings". The list of options will show in the display. – Language J –... -
Page 34: Time
200 hours. After 200 hours it will show "12:00" and will need to be re-set. Display Select how you want the time to appear in the display when the oven is switched off: – On The time of day will always show in the display. -
Page 35: Lighting
The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. – Temperature controlled (Factory default) -
Page 36: Pyrolytic
Auto roast – Rapid (Factory default) All the heating elements are switched on together in order to heat the oven up as quickly as possible to the required temperature. – Normal Only the heating elements for the cooking function selected are switched on. -
Page 37: Keypad Tone
To switch off the safety lock for one cooking programme ^ Select an oven function. The system lock symbol will appear in the display. ^ Touch the OK sensor for 3 seconds. The symbol will switch off, and the oven is ready for use. Settings... -
Page 38: Temperature Format
Settings Temperature format – °C (Factory default) – °F Showroom programme This programme is for dealers who want to demonstrate the appliance without the heater elements working. Do not activate this setting for domestic use! – Off (Factory default) – Demo programme Follow the prompts in the display to switch the demo programme on. -
Page 39: Cleaning And Care
If this is not done, it might become impossible to remove and could cause the surface to alter or discolour. Clean the front using a damp Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid. Wipe dry using a soft cloth. -
Page 40: Accessories
Cleaning and care Accessories Remove all accessories as well as the runners and any extra accessories such as FlexiClip runners from the oven interior before starting the pyrolytic cleaning process. The high temperatures needed for pyrolysis will damage the accessories. -
Page 41: Perfectclean
/ or abrasive materials. Because PerfectClean enamel is designed to be easily cleaned, the use of these cleaners is not recommended. However, if you still cannot get the surface clean, an oven cleaner can be used, but for a couple of minutes only. - Page 42 Cleaning and care Do not attempt to use on a hot oven or accessories. Allow the PerfectClean surfaces to cool down to room temperature before applying an oven spray. Apply a spray oven cleaner to the soiled areas. Leave to take effect for a...
-
Page 43: Oven Interior
Oven interior The oven interior is coated with dark pyrolytic enamel which facilitates cleaning. This is a particularly hard enamel with an extremely smooth surface and very good anti-stick properties. Manual cleaning of the oven interior Allow the oven to cool down before cleaning by hand. -
Page 44: Pyrolytic Cleaning Of The Oven Interior
Make sure children cannot touch the oven whilst a pyrolytic programme is running. Danger of burning. During the pyrolytic process the oven is heated to over 400 °C. Any residual soiling is broken down and reduced to ash by the high temperatures. -
Page 45: Starting A Pyrolytic Process
Starting a pyrolytic process ^ Take all accessories out of the oven. ^ Turn the function selector to Pyrolytic ^ Use the ; or ? sensor to select Level 1, 2 or 3. ^ Start the pyrolytic process required with the OK sensor. - Page 46 Cleaning and care The pyrolytic process will be cancelled, – if the oven is switched off. – if another function is selected during the pyrolytic process. – in the event of a power cut. In the two instances above, switch the oven off.
-
Page 47: To Remove The Oven Door
To remove the oven door The oven door is connected to the oven by hinges. Before removing the door, the locking clamps on both hinges have to be released. ^ Open the door fully. ^ To release the locking clamps on the hinges turn them upwards as far as they will go until they are at an angle. -
Page 48: To Dismantle The Oven Door
Cleaning and care To dismantle the oven door The oven door is made up of four panes of glass and has vents at the top and bottom. When the oven is operating, air is circulated through the door to keep the outer pane cool. - Page 49 ^ Gently lift up the lower of the two middle panes and remove it. ^ Clean the glass panes and other parts with a Miele E-cloth or a clean sponge and a solution of hot water with a little washing-up liquid. Wipe...
- Page 50 Cleaning and care ^ To refit the door: The two middle panes are identical. To ensure that they are refitted correctly, one of the corners is more angled than the others. When refitting the lower pane, the more angled corner must be inserted in the left hand retainer at the bottom.
-
Page 51: To Refit The Door
^ Push the inner pane into the plastic strip and insert it in the retainers. ^ Flip the glass pane retainers inwards to close them. Cleaning and care To refit the door ^ Hold the door securely at both sides and carefully fit it back onto the hinge guides. -
Page 52: To Remove The Runners
Otherwise the hinges could work loose, resulting in damage to the door. To remove the runners Make sure the oven heating elements are switched off and cool. Danger of burning. ^ Pull the runners forwards out of the holder and remove. -
Page 53: To Lower The Top Heat/Grill Element
To lower the top heat/grill element Make sure the oven heating elements are switched off and cool. Danger of burning. ^ Remove the runners. ^ Unscrew the wing nut and lower the top heating element. Do not use force to pull it down as this can cause the element to break. -
Page 54: Problem Solving Guide
(see "Settings - Time of day - Display"). contact a qualified electrician or the Miele Service Department. (see "Settings - Safety"). "Settings - Showroom prog."). contact a qualified electrician or the Miele Service Department. - Page 55 Problem Possible cause and remedy ^ Disconnect the appliance from the electricity supply: The top lighting is not working. ^ Turn the lamp cover a quarter turn anti-clockwise to ^ Replace it with a new halogen lamp (Osram 66725 AM/A, ^ Refit the lamp cover and turn it clockwise to secure it.
- Page 56 – Fault 32: The door has not locked for the pyrolytic – Fault 33: The door lock for the pyrolytic cleaning process – Fault 54: The food probe is faulty. For all other fault codes please contact the Miele Service Department. was not reached.
-
Page 57: After Sales Service
– your Miele Dealer – Miele (see back cover for address). A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions. -
Page 58: Optional Accessories
A range of additional accessories as well as cleaning and care products are available for your Miele oven. Depending on product they are available to order from your Miele Dealer, the Miele Spare Parts Department or via the internet on www.miele-shop.com. - Page 59 A lid is available separately for each of the gourmet oven dishes. When ordering a lid, please specify the gourmet oven dish it is to be used with (HUB 5000 M or XL). Miele E-cloth Removes grease and stains and leaves no smearing.
-
Page 60: Electrical Connection
THIS APPLIANCE MUST BE EARTHED When replacing the cable supplied with another cable or changing the connection, only cable type H 05 VV-F or H 05 RR-F with a suitable cross-sectional area (CSA) may be used (available from the Miele Customer Contact Centre). -
Page 61: Building-In Diagrams
Building-in diagrams Dimensions are give in "mm". Appliance and niche dimensions Installation in a base unit Installation in a tall unit * Appliances with glass front ** Appliances with metal front... -
Page 62: Front Dimensions
Building-in diagrams Front dimensions A H 5360: 53.2 H 5460: 47.5 B Appliances with glass front: 2.2 Appliances with metal front: 1.2... -
Page 63: Installing The Oven
^ Push the appliance into the oven housing unit and align it. ^ Open the oven door and using two screws secure it to the side walls of the housing unit through the holes in the oven trim. - Page 64 Alteration rights reserved / 22 / 4209 M.-Nr. 07 644 430 / 02 (H 5360 BP; H 5460 BP)