Download  Print this page

The Light Bulbs; The Base Grille - Whirlpool ET22DM Use And Care Manual

No-frost refrigerator-freezer
Hide thumbs

Advertisement

Table of Contents
Changing
the light
bulbs
Electrical
Shock
Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main
power supply.
Failure to do so could result in electrical
shock or personal injury.
To change
the refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a JO-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change
freezer
light
(ET22DM
and
ET22DK):
1.
Disconnect refrigerator from power supply.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25watt
appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE:
Not all commercial
appliance bulbs will fit
your refrigerator.
Be sure to replace a bulb with
one of the same size and shape.
Removing
the base grille
To remove
the grille:
Condenser
coils
1. Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3.
Do not remove
Tech
Sheet
fastened behind
the grille.
To replace
the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 16.
13

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Whirlpool ET22DM

This manual is also suitable for:

Et22dkEt18dkEt20dmEt20dk