Sony TA-VA777ES Service Manual page 2

Outputs (Analog)
REC OUT
(MD/DAT, TAPE,
VIDEO 1, 2, 3):
Voltage: 200 mV,
Impedance:
1 kilohm
PRE OUT (FRONT L/R,
CENTER, REAR L/R,
SUB WOOFER):
Voltage: 2 V
Impedance:
1 kohms
PHONES:
Accepts low- and
high-impedance
headphones
Outputs (Digital)
Optical (MD/DAT)
Sampling Frequency
48 kHz
EQ BASS:
99 Hz ~ 1.0 kHz
(21 steps)
MID:
198 Hz ~ 10 kHz
(37 steps)
TREBLE:
1.0 kHz ~ 10 kHz
(23 steps)
Gain levels:
10 dB, 0.5 dB step
Decodable Digital Formats
Dolby Digital (AC-3),
DTS
MODEL IDENTIFICATION
– BACK PANEL –
2
Video section
Inputs Video: 1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p
75 ohms
Outputs Video: 1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p
75 ohms
General
Power reqements
230 V AC, 50/60 Hz
Power consumption
420 W
AC outlets 2 switched, total 100 W
Dimensions 430 174 462 mm
including projecting
parts and controls
Mass (Approx.)
24.3 kg
Supplied accessories
• Remote commander RM-TP503 (remote) (1)
• LR6 (size-AA) alkaline batteries (4)
• Coin shaped lithium battery (CR-2032) (1)
Design and specifications are subject
to change without notice.
PART NO.
MODEL PARTS No.
AEP model 4-222-054-5s
UK model 4-222-054-6s