Fuel, Coolants & Lubricants - TATA Motors Indica V2 Owner's Manual & Service Book

Ofrecido por www.electromanuales.com
IMPORTANT INFORMATION
Fuel :
High speed diesel conforming to IS 1460 or DIN 51601 or
equivalent is recommended to be used as fuel.
At very low temperatures fluidity of diesel may become
insufficient due to paraffin separation. It is therefore, necessary
to mix supplementary fuel with summer or winter grade diesel.
The supplementary fuel to be used is kerosene or aviation
turbine fuel.
Ratios for mixing of supplementary fuel and diesel are shown
in the table :
Ambient Percentage
temperature upto Summer
Deg C. Grade diesel
upto 0 100
0 to -10 70
-10 to -15 50
Ambient Percentage
temperature upto Winter
Deg C. Grade diesel
upto -15 100
-15 to -20 70
-20 and below 50
Care should be taken that diesel and supplementary fuel are
thoroughly mixed before filling.
Note : where catalytic converter is fitted, it is mandatory to use
Diesel fuel with sulphur contents less than 0.25%. Use of any
other diesel fuel can increase the pollutants.
Lubricants : (Diesel)
Engine Oil : Recommended grade of engine oil conforming
to API CF4+ specification and range of ambient temperature
at which these can be used are given in the table below.
Ambient temp.
in deg. C
Suppl.
-10 deg. & above
fuel
-20 deg. to 30 deg.
0
Below -10 deg.
30
50
Transaxle : Use recommended brand of EP 80 gear oil.
Grease for axle bearings : Lithium base grease
Suppl.
Brake fluid : IS 8654/DOT 3
fuel
Power Steering : ATF Type A, Suffix A
0
30
50
Fuel, Coolants & Lubricants
Engine oil grade
SAE 15W/40 or SAE 15W/50
SAE 10W/30
SAE 5W/20 or SAE 5w/30
121