Transaxle; Checking Of Oil Level; Changing Oil In Transaxle - TATA Motors Indica V2 Owner's Manual & Service Book

Ofrecido por www.electromanuales.com
MAINTENANCE & CAR CARE
Transaxle Oil :

Checking of Oil Level :

1. Clean the oil level plug and the surrounding area.
2. Remove the oil level plug and check whether oil is dripping out. The
oil level must not be below the filler plug.
Add oil to bring it to the required level.
3. Tighten the oil level plug to 3 - 4 mkg. torque.

Changing Oil in Transaxle :

1. Let the engine idle for about 5 min. in neutral gear, so that the Transaxle
is warmed up.
2. Clean the oil level plug, drain plug and surrounding area.
3. Place a container under the transaxle to collect the oil.
4. Remove the oil level plug.
5. Remove the drain plug and let the oil drain out fully.
6. Refit the drain plug with a new sealing washer. Tighten the oil drain
plug and fill new recommended oil through the oil level plug.
Tighten both the oil drain plug and oil level plug (with new sealing
washer) to 3 - 4 mkg. torque.
84
Oil Filler / Level Plug
Reverse Light
Switch

Transaxle

Drain Plug