Figure 5.2: Manual Video Adjust Dialog Box; Table 5.2: Descriptions For Figure 5.2 - Avocent AUTOVIEW 3008 Installer/User Manual

72 AutoView 3008/3016 Switch Installer/User Guide
1. Select Tools - Manual Video Adjust from the Video Viewer window menu.
-or-
Click the Manual Video Adjust button.
The Manual Video Adjust dialog box appears. Figure 5.2 shows the dialog box, and
descriptions follow in Table 5.2.
1

Figure 5.2: Manual Video Adjust Dialog Box

Table 5.2: Descriptions for Figure 5.2

Number Description
1 Image Capture Width
2 Pixel Sampling/Fine Adjust
3 Image Capture Horizontal Position
4 Image Capture Vertical Position
5 Contrast
6 Brightness
7 Block Noise Threshold
2. Click the icon corresponding to the feature you wish to adjust.
3. Move the Contrast slider bar and then fine-tune the setting by clicking the Min (-) or Max (+)
buttons to adjust the parameter for each icon pressed. The adjustments display immediately in
the Video Viewer window.
4. When finished, click Close to exit the Manual Video Adjust dialog box.
2 6
3
4 5
7
8
Number Description
8 Pixel Noise Threshold
9 Automatic Video Adjustment
10 Refresh Image
11 Adjustment bar
12 Video Test Pattern
13 Performance Monitor
14 Close button
9
10
11
12
13
14