Getting Started; Setting Up Your Network; Table 2.1: Descriptions For Figure 2.1 - Avocent AUTOVIEW 3008 Installer/User Manual

Table 2.1: Descriptions for Figure 2.1

Number Description
1 Digital User
2 Network
3 Analog User
4 AutoView 3016 Switch
5 Power Cord

Getting started

Before installing your AutoView 3008/3016 switch, refer to the following lists to ensure you have
all items that shipped with the switch, as well as other items necessary for proper installation.
Supplied with the AutoView 3008/3016 switch
• Local country power cord
• Rack mounting brackets
• Rack Mounting Bracket Quick Installation Guide
• AutoView 3008/3016 Switch Quick Installation Guide
• One DB9 M/F serial cable
Additional items needed
• One IQ module per target server or serial IQ module per serial device. IAC cables can also be
used.
• One UTP patch cable per IQ module (4-pair UTP, up to 30 meters)
• UTP patch cable(s) for network connectivity (4-pair UTP, up to 30 meters)

Setting up your network

The AutoView 3008/3016 switching system uses IP addresses to uniquely identify the switch and
the target devices. The AutoView 3008/3016 switch family supports both Dynamic Host
Configuration Protocol (DHCP) and static IP addressing. Avocent recommends that IP addresses
be reserved for each switch and that they remain static while the switches are connected to the
network.
Number Description
6 Ports 1-16
7 Local USB Connections
8 Servers 1-16
9 IQ or IAC modules, PS/2, USB, Sun and serial adaptors
are available
Chapter 2: Installation 5