TABLE OF CONTENTS Technical Details Important Safety Instructions Special SEBO Product Features S-Class Filtration AIRBELT Shock Absorber Bag Full or Clog Warning – Auto Shut-Off Identification of Parts Assembly Optional Attachments Standard Attachments Operating Instructions Starting the Machine Suction Control Operating the Machine Additional Operating Instructions for C3.1 with Power Head...
16. Do not use vacuum without filter bag and/or filters in place. either hose or power head. 17. Turn off all machine controls before unplugging. 33. Use a SEBO power head only in combination with a SEBO vacuum cleaner. 18. Use extra care when cleaning on stairs.
SPECIAL SEBO PRODUCT FEATURES Your SEBO AIRBELT C canister vacuum is among the most technically advanced vacuum cleaners in the world. Some of its unique features are: S-Class Filtration. Certified by leading Allergy foundations in Europe, the AIRBELT C vacuum provides the •...
(9) is in the same position on all of the heads, brushes and power heads. NOTE: All illustrations shown in this manual NOTE: To attach a SEBO power head (ET-H, ET-C, ET-1 or ET-2) to your represent the C3.1 model except where part C3.1 canister, please refer to your power head owner’s manual (page 5)
Therefore, vacuums with rotating brushes, includ- ing your SEBO, may damage some floor coverings or surfaces. Some types of high-gloss hardwood floors, cushion vinyl, berber carpets, long shag, and delicate or hand-woven car- pets are particularly vulnerable to damage by rotating brushes.
ADDITIONAL OPERATING INSTRUCTIONS FOR C-3.1 WITH POWER HEAD Please refer to your power head owner’s manual for more information Starting The Machine and Suction Control - Figures 4, 5 & 6a A. Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 4).
Using the Telescopic Tube, Hose & Attachments - Figures 7 & 8 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power and unplug the vacuum.
(48), and while holding it down, stretch the AIRBELT cover around the foam into the opposite groove (48). Continue around the vacuum. Secure the ends with the clip (46). SEBO AIRBELT covers are available in a variety of colors and patterns. See your AIRBELT cover SEBO dealer for available selection.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! NOTE! C3.1 users with ET-C, ET-H, ET-1 or ET-2 power heads, please refer to your power head user’s manual for more detailed instructions for remov- ing clogs in your power head. If the “bag full or clog”...
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 5. 2. Not plugged into working outlet. 2. Use another outlet. 3.
C2.1 AIRBELT SCHEMATIC AND PARTS LIST Canister with Handle/Hose # 9648 AM C2.1 (Teal) # 9646 AM C2.1 (Red) Teal Machine Pos. Part # Description 6383 TK Attachment cover - C2.1 teal 6382 AM C1.1 teal 6045 Spring 6168 DG Bearing block / hinge 6117 ER Attachment clip set of 3...
C3.1 AIRBELT SCHEMATIC AND PARTS LIST Canister with Handle/Hose # 9630 AM C3.1 (White) # 9652 AM C3.1 (Red) White Machine Pos. Part # Description 6215 AM Attachment cover - white 6045 Spring 6168 DG Bearing block / hinge 6117 ER Attachment clip set of 3 6083 DG Release button...
To locate an authorized SEBO dealer in your area, or to with your new SEBO vacuum cleaner. You may also reg- register a warranty claim in the United States of ister on our website at www.sebo.us.
Need help?
Do you have a question about the AIRBELT C and is the answer not in the manual?
Questions and answers