To contact SEBO in Canada: SEBO America, LLC SEBO Canada Telephone: (800) 334-6614 Telephone: (877) 258-5005 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
15. Do not use vacuum without filter bag and/or filters in place. 31. Use a SEBO power head only in combination with a SEBO 16. Turn off all machine controls before unplugging. vacuum cleaner.
If the Mid-sized Canister Vacuum – The SEBO AIRBELT K3 and K2 vacuum’s airflow pathway becomes restricted are considered mid-size canister vacuums, which means they due to a full bag or the existence of a clog, the amber “BAG FULL...
AIRBELT K2 Kombi: The SEBO AIRBELT K2 Can Not Use a Power Brush – The Kombi is a straight-suction vacuum. As a AIRBELT K2 Kombi does not have an elec- result, it differs from the AIRBELT K3 Pre- trified telescopic tube and hose; therefore,...
OPTIONAL ATTACHMENTS, ACCESSORIES, BAGS & FILTERS In addition to the standard on-board tools, a variety of optional SEBO filter bags can be purchased in boxes of eight and filters are attachments are available. The nine-foot extension hose (extends sold separately. Also, bags and filters can be purchased together suction hoses) and the 22-inch extension wand are very popular in model-specific kits called “Service Boxes.”...
Changing Bags is Easy and Clean – SEBO filter bags can be changed in just a few seconds, and a hygiene cap keeps dust sealed inside during removal and disposal.
When possible, consult the materials supplied by your flooring manufacturer for infor- mation on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
ADDITIONAL OPERATING INSTRUCTIONS FOR K3 PREMIUM WITH POWER HEAD Please refer to your ET-1 power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9 & 10 Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8).
USING THE TELESCOPIC TUBE, HOSE & ATTACHMENTS Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum.
AIRBELT cover around the foam (54) into the opposite groove (56). Continue around the vacuum. Secure the ends with the clip (55). SEBO AIRBELT covers are available in a variety of colors and patterns. See your SEBO dealer for available selection.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! NOTE! K3 Premium users with ET-1 power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head. If the “bag full or clog” warning light (10) remains illuminated after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system.
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 8. 2. Not plugged into working outlet. 2. Use another outlet. 3.
Need help?
Do you have a question about the AIRBELT K2 KOMBI and is the answer not in the manual?
Questions and answers