TABLE OF CONTENTS Technical Details Important Safety Instructions Special SEBO Product Features S-Class Filtration Bag Full or Clog Warning – Auto Shut-Off AIRBELT Shock Absorber Identification of Parts Assembly Optional Attachments Standard Attachments Operating Instructions Starting the Machine Suction Control...
16. Do not use vacuum without filter bag and/or filters in place. either hose or power head. 17. Turn off all machine controls before unplugging. 33. Use a SEBO power head only in combination with a SEBO vacuum cleaner. 18. Use extra care when cleaning on stairs.
SPECIAL SEBO PRODUCT FEATURES Your SEBO AIRBELT K canister vacuum is among the most technically advanced vacuum cleaners in the world. Some of its unique features are: S-Class Filtration. Certified by leading Allergy foundations in Europe, the AIRBELT K vacuum provides the •...
Snap the dusting brush (28) into the holder. NOTE: To attach a SEBO power head (ET-H or ET-1 ) to your K3 canister, please refer to your power head owner’s manual (page 5) for instructions. Attaching incorrectly could cause damage.
When possible, consult the materials supplied by your flooring manufacturer for infor- mation on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
ADDITIONAL OPERATING INSTRUCTIONS FOR K3 WITH POWER HEAD Please refer to your power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9, 10a & 10b Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8).
Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum.
AIRBELT cover around the foam (54) into the opposite groove (56). Continue around the vacuum. Secure the ends with the clip (55). SEBO AIRBELT covers are available in a variety of colors and patterns. See your SEBO dealer for available selection.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! NOTE! K3 users with ET-H or ET-1 power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head. If the “bag full or clog” warning light (10) remains illuminated after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system.
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 5. 2. Not plugged into working outlet. 2. Use another outlet. 3.
6756 DG Bag cover, cpl. (New style -Includes castor 6752 DG) 6607 DG Cover release 6629 AM Filter bag SEBO K 6682 DG Castor cpl.,(Old style for use on 6600 DG bottom casing and 6678 DG bag cover) 6752 DG Castor cpl.
- Use castor 6682 DG) 6756 DG Bag cover, cpl. (New style -Includes castor 6752 DG) 6607 DG Cover release 6629 Filter bag SEBO K 6682 DG Castor cpl.,(Old style for use on 6600 DG bottom casing and 6678 DG bag cover) 6752 DG Castor cpl.
To locate an authorized SEBO dealer in your area, or to with your new SEBO vacuum cleaner. You may also reg- register a warranty claim in the United States of ister on our website at www.sebo.us.
Need help?
Do you have a question about the AIRBELT K and is the answer not in the manual?
Questions and answers