Zoom; Hdmi; Video Out; Pal/Ntsc - NAD T 535 Owner's Manual

OPERATION
USING THE T 535 –FEATURES

ZOOM

Use [ZOOM] to enlarge the video image. Press [ZOOM] during playback or
still playback to activate the Zoom function.
Depending on the media, each press of the ZOOM button changes the TV
screen in the following sequence: ZOOM X 1.5, ZOOM X 2, ZOOM X 3 and
ZOOM X 4.
Use the DVD 9's keys to move through the zoomed picture. To
resume normal playback, press [ZOOM] repeatedly until [OFF].
NOTE
Zoom may not work on some DVDs.

HDMI

Toggle the HDMI button of DVD 9 remote control to turn ON or OFF HDMI
output. When turned ON, "HDMI ON" will be displayed in the VFD followed
by the applicable resolution setting.

VIDEO OUT

Some users may prefer to turn OFF the video display during CD playback.
Toggle [VIDEO OUT] key to turn OFF or restore video display.
NOTE
[VIDEO OUT] key is not applicable at HDMI ON mode.
22

PAL/NTSC

At STOP mode, toggle the [PAL/NTSC] key of DVD 9 remote control to
directly set the TV type to either PAL or NTSC system. This DVD 9 [PAL/NTSC]
key feature is effective for European version only

MULTI/2CH

There are three types of SACD discs: single-layer, dual-layer and hybrid. Each
type may contain up to two areas of recorded information: a High Quality
Stereo area and a High Quality Multi-channel area.
Press STOP during SACD playback. Toggle the [MULTI/2CH] key to switch
between the SACD multi-channel and SACD stereo areas.
[MULTI/2CH] key can also be used on other disc types depending on the
disc's available audio format.

DIMMER

Toggle to either reduce or restore normal VFD brightness.