OPERATION
uSing the t 535 –featureS
ZOOM
Use [ZOOM] to enlarge the video image. Press [ZOOM] during playback or
still playback to activate the Zoom function.
Depending on the media, each press of the ZOOM button changes the TV
screen in the following sequence: ZOOM X 1.5, ZOOM X 2, ZOOM X 3 and
ZOOM X 4.
Use the DVD 9's
resume normal playback, press [ZOOM] repeatedly until [OFF].
NOTE
Zoom may not work on some DVDs.
HDMI
Toggle the HDMI button of DVD 9 remote control to turn ON or OFF HDMI
output. When turned ON, "HDMI ON" will be displayed in the VFD followed
by the applicable resolution setting.
VIDEO OUT
Some users may prefer to turn OFF the video display during CD playback.
Toggle [VIDEO OUT] key to turn OFF or restore video display.
NOTE
[VIDEO OUT] key is not applicable at HDMI ON mode.
T535_eng_OM_v07.indd 22
keys to move through the zoomed picture. To
PAL/NTSC
At STOP mode, toggle the [PAL/NTSC] key of DVD 9 remote control to
directly set the TV type to either PAL or NTSC system. This DVD 9 [PAL/NTSC]
key feature is effective for European version only
MULTI/2CH
There are three types of SACD discs: single-layer, dual-layer and hybrid. Each
type may contain up to two areas of recorded information: a High Quality
Stereo area and a High Quality Multi-channel area.
Press STOP during SACD playback. Toggle the [MULTI/2CH] key to switch
between the SACD multi-channel and SACD stereo areas.
[MULTI/2CH] key can also be used on other disc types depending on the
disc's available audio format.
DIMMER
Toggle to either reduce or restore normal VFD brightness.
16/7/07 08:12:26