Scart Video Out (European Models Only); Picture Settings - NAD T 535 Owner's Manual

OPERATION
USING THE T 535 – VIDEO SETUP MENU

SCART VIDEO OUT (EUROPEAN MODELS ONLY)

SCART carries both composite video and RGB signals. One could select
which kind of video output signal will be routed over SCART OUT.
CVBS : Select to output composite video signals.
RGB : Split the signal into the three fundamental colors Red, Green and
Blue (RGB) resulting to greater picture resolution and elimination of
artifacts associated with traditional composite video signals.

PICTURE SETTINGS

The T 535 comes with 10 sets of picture color settings that you can define
yourself. The "Picture Settings" section at the "REFERENCE" page shows a detailed
guideline on applicable picture settings with respect to video output.
Brightness : Adjust overall brightness of the image.
Contrast : Adjust bright areas (white level) in the image.
Hue : Adjust the hue or phase of the image.
Sharpness Mid : Adjust the sharpness of the image for the
intermediate frequencies.
Sharpness High : Adjust the sharpness of the image for the high
frequencies.
DNR (Digital Noise Reduction) : Set to reduce video noise.
Gamma : Adjust intensity of the picture non-linearly. Select when
an image's dark portions appears obscure or bright portions become
brighter than necessary.
Chroma level : Adjust color density.
Chroma delay : Adjust the shift of the brightness and color signal of an
image.
True Life : More dynamic picture is produced by increasing the picture
contrast and the color intensity.
NOTE
All picture settings are not available for SCART (RGB) output.
18