Advertisement
You can control your set-top-box or satellite box with the Samsung Smart Control. To
establish control, you must first set up theIR extender cable. If you don't have an STB,
skip this section.
1
Connect theIR extender cable to the lV's IR output connector.
I
~~
~~
~~
I~
I~
I~
0~
\..
-
-
- -
IR Out
Connect the
IR Extender Cable here.
Place the transmitter
end within 4 inches
of the set-top-box's
remote control sensor.
2
Position the transmitter end within 4 inches (1 0 em) of the set-top-box's remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of the I R extender cable and the set-
top-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
3
Finalize control of your set-top or satellite box when you run Initial Setup.
Advertisement
