Table of Contents
Advertisement
SERVICING YOUR GENERATOR
FUSE
If the fuse is blown, the starter motor won't operate.
In the event of fuse failure, locate the cause of failure and repair before
you continue operation. If the fuse continues to fail, discontinue
generator use and consult an authorized Honda generator dealer.
1.
Turn the engine switch OFF and remove the key before checking or
replacing the fuse.
2.
Loosen the cover screw and
remove the battery
maintenance cover.
3.
Remove the fuse holder cover
and pull the fuse out.
4.
Replace the fuse with a
fuse of the same type and
rating.
Specified fuse:
Never use a fuse with
different rating from that
specified. Serious damage to
the electrical system or fire
may result.
5.
Install the fuse holder cover and the maintenance cover in the
reverse order of removal (see page
Never operate the generator without the maintenance cover in place,
as poor engine and generator performance will result.
58
1 A, 15 A
COVER
MAINTENANCE
SCREW
COVER
FUSE HOLDER
FUSE HOLDER COVER
56
).
FUSE (1A)
FUSE (15A)
Advertisement
Table of Contents
