Table of Contents
Advertisement
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
1.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, drain plug and sealing washer.
2.
Allow the used oil to drain completely, then reinstall the drain plug
and sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground or pour it down the
drain.
3.
With the generator in a level position, fill to the outer edge of the oil
filler hole with the recommended oil (see page
4.
Screw in the oil filler cap/dipstick securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER CAP/DIPSTICK
46
UPPER LIMIT
SEALING
WASHER
OIL DRAIN PLUG
47
).
OIL FILLER CAP/
DIPSTICK
Advertisement
Table of Contents
