Honda EM6500is Owner's Manual page 74

TECHNICAL & CONSUMER INFORMATION
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your authorized Honda servicing dealer.
Hard starting or stalling after starting.
Rough idle.
Misfiring or backfiring under load.
Afterburning (backfiring).
Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your Honda engine were designed,
built, and certified to conform with appropriate emission regulations.
We recommend the use of genuine Honda parts whenever you have
maintenance done. These original-design replacement parts are
manufactured to the same standards as the original parts, so you can
be confident of their performance. The use of replacement parts that
are not of the original design and quality may impair the effectiveness
of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emission
regulations.
Maintenance
Follow the MAINTENANCE SCHEDULE on page
this schedule is based on the assumption that your machine will be
used for its designed purpose. Sustained high-load or high-
temperature operation, or use in dusty conditions, will require more
frequent service.
72
42 . Remember that