Honda EM6500is Owner's Manual page 92

OPTIONAL PARTS
4. Pass the remote control cable through the supplied wire grommet
and fit the grommet into the maintenance cover knockout.
5. Plug the remote control cable into the 6-pin connector.
6. Install the maintenance cover and tighten the cover screw.
REMOTE
CONTROL CABLE
REMOTE CONTROL CABLE
REMOTE CONTROL BOX
7. To avoid accidentally unplugging the remote control cable, secure
the cable to the generator frame with a cable tie as shown.
CABLE TIE
Never operate the generator
without the maintenance cover in
place, as poor engine and generator
performance will result.
When the remote control is not
being used, replace the plug on the
connector.
90
MAINTENANCE COVER GROMMET
PLUG