Resetting The Unit - Kenwood DNX7230BT Instruction Manual

Resetting the Unit

If the unit or the connected unit fails to
operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
• Disconnect the USB device before pressing the
<Reset> button. Pressing the <Reset> button
with the USB device connected can damage
the data stored in the USB device. For how to
disconnect the USB device, see How to Play
Media (P.15).
• When the unit is turned on after resetting, the
Initial SETUP screen appears. See Initial setup
(P.13).
Return to the Top page
Troubleshooting
109