Maintenance Record - Invacare 6302G User Manual

SYMPTOMS
Height Adjustment (Model 6302GADH Only)
Tub will not raise or Glide pads and rub panels not greased
lower
Bad electrical connections, no electrical
power to tub
Actuator overload
Actuator burned out
Obstacle in UP/DOWN travel path

Maintenance Record

DATE MAINTENANCE PERSON
Part No. 1167456
FAULTS
TYPE OF MAINTENANCE PERFORMED
31
6 INSPECTION, MAINTENANCE AND TROUBLESHOOTING
Apply grease to glide pads and rub panels. Refer to Maintenance for
6302GADH Adjustable Height Rub Panels and Glide Pads on page 30.
Unplug the tub. Check and reset GFCI. Check electrical cord, plug and
outlet for damage. Replace damaged parts as necessary per local codes.
Wait five minutes and try to adjust the height again.
Contact your Invacare Dealer.
Inspect for and remove any obstacle.
SOLUTION
NOTES
Invacare® Supine Whirlpool Tubs