Operation; Reference - JVC D-ILA DLA-RS46 Specifications

4.8.1

Operation

Use the command as shown in the following examples.
Purpose: To switch the gamma coefficient of the gamma table "Custom1" to 2.1.
(Current setting: Gamma bank "Custom1", Gamma coefficient "2.2")
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x21
'!'(Operation)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows.
2: ←Projector
0x06 0x89
ACK PJ
(3) The projector switches the gamma coefficient of the gamma table "Custom1".
4.8.2

Reference

Use the command as shown in the following examples.
Purpose: To confirm the current gamma coefficient of the gamma table "Custom2" of
the projector. (Current setting: Gamma bank "Custom2", Gamma coefficient " 1.8")
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x3F
'?'(Reference)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as
follows.
2: ← Projector
0x06 0x89
ACK
(3) The projector transmits a report of the gamma coefficient to the external Controller.
3: ← Projector
0x40
'@'(Response)
By the above exchange, it can be confirmed that the gamma coefficient of gamma table "Custom2" is 1.8.
0x89 0x01
PJ Individual : 1
0x01 0x47
Individual : 1
0x89 0x01
PJ Individual : 1
0x01
PJ Individual : 1
0x89 0x01
PJ Individual : 1
0x47 0x50
'G' 'P'
0x50 0x0A
'G' 'P' End
0x47 0x50
'G' 'P'
0x47 0x50 0x0A
'G' 'P' End
0x47 0x50
'G' 'P'
25 / 61
4 Command control
0x33 0x0A
2.1 End
0x0A
End
0x30 0x0A
1.8 End
PJ04030102B