Reference - JVC D-ILA DLA-RS46 Specifications

(Example4) Port setting
Purpose: To set the Port to 10000(=0x2710).
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x21
'!'(Operation)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows.
2: ←Projector
0x06 0x89
ACK PJ
(3) The projector saves 10000 to the Port. (No matter what the Network reboot)

4.14.2 Reference

Use the command as shown in the following examples.
(Example1) DHCP Client confirmation
Purpose: To confirm DHCP Client.
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x3F
'?'(Reference)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows.
2: ← Projector
0x06 0x89
ACK
(3) The projector transmits DHCP Client to the external controller.
3: ← Projector
0x40
'@'(Response)
By the exchange above, it can be confirmed that the projector DHCP Client is set to Off.
0x89 0x01 0x4C
PJ Individual : 1 'L'
0x01 0x4C
Individual : 1
0x89 0x01
PJ Individual : 1
0x01
PJ Individual : 1
0x89 0x01
PJ Individual : 1
0x53 0x50 0x54
'S' 'P' 'T'
0x53 0x0A
'L' 'S' End
0x4C 0x53
'L' 'S'
0x4C 0x53 0x0A
'L' 'S'
0x4C 0x53
'L' 'S'
58 / 61
4 Command control
0x32 0x37 0x31
10000(=0x2710)
0x44 0x53
'D' 'S'
End
0x30 0x0A
Off End
0x30 0x0A
End
0x0A
End
PJ04030102B