Operation; Reference - JVC D-ILA DLA-RS46 Specifications

4.6.1

Operation

Use the command as shown in the following examples.
Purpose: To switch the gamma table to Custom1. (Current setting: Normal)
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x21
'!'(Operation)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows.
2: ←Projector
0x06 0x89
ACK PJ
(3) The projector switches the gamma table to Custom1.
4.6.2

Reference

Use the command as shown in the following examples.
Purpose: To confirm the current gamma table of the projector. (Current setting:
Normal)
(1) Transmit the data from the external controller to the projector as follows.
1: External controller →
0x3F
'?'(Reference)
(2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows.
2: ← Projector
0x06 0x89
ACK
(3) The projector transmits a report of gamma table to the external controller.
3: ← Projector
0x40
'@'(Response)
By the above exchange, it can be confirmed that the projector's gamma table is set to Normal.
0x89 0x01
PJ Individual : 1
0x01 0x47
Individual : 1
0x89 0x01
PJ Individual : 1
0x01
PJ Individual : 1
0x89 0x01
PJ Individual : 1
0x47 0x54
'G' 'T' Custom1
0x54 0x0A
'G' 'T' End
0x47 0x54
'G' 'T'
0x47 0x54 0x0A
'G' 'T' End
0x47 0x54
'G' 'T'
21 / 61
4 Command control
0x34 0x0A
End
0x0A
End
0x30 0x0A
Normal End
PJ04030102B