Ac Operation - Honda EG5000X Owner's Manual

AC qperation
1. Start the engine.
2. Turn the voltage selector switch to either position as reguired.
NOTE: With the voltage sector swich in the "12OV/24OV" position, you can use the
12OV and 240V receptacles simultaneously. If you are not using the 240V receptacle,
but you require more power from the 120V twist-lock receptacle, then turn the switch
to the "120V" position.
3. Switch on the AC circuit breaker.
4. Plug in the appliance.
CAUTION:
l
Be sure that appliances do not exceed the generafor's rated load capacity for more
than 30 minutes and that they never exceed the maximum load capacity.
Substantial overloading will switch off the circuit breaker. Marginal overloading
may not switch off the circuit breaker, but it will shorten the service life of the
generator.
l
If an overloaded circuit causes the AC circuit breaker to switch off, reduce the
electrical load on the circuit, and wait a few minutes before resetting the circuit
breaker.
l
Be sure that all appliances are in good working order before connecting them to
the generator. If an appliance begins to operate abnormally, becomes sluggish, or
stops suddenly, turn off the circuit breaker and the generator engine switch
immediately. Then disconnect the appliance and examine it for signs of malfunction.
VOLTAGE SELECTOR
AC CIRCUIT BREAKER
17