Moen PureTouch AquaSuite 77100 Owner's Manual page 7

INSTALLATION INSTRUCTIONS
AquaSuite ™ Faucet Installation
After determining in which location you will install your PureTouch AquaSuite
(may involve drilling mounting hole – see page 5), install gasket onto escutcheon
and drop LED wire through mounting hole. Orient filter life indicator to the front
so it will be visible during faucet use.
Thread handle insert into valve body with mounting shank and drop through
mounting hole, taking care to orient the handle to either the left or right side for
comfortable use.
To install the mounting bracket,
you must first determine your
deck thickness. Your deck
thickness determines whether
the mounting bracket is installed
open side up or down. A
minimum of 1/2" of mounting
shank must be exposed for
proper attachment of the supply
hose from the filter. Position
mounting bracket onto mounting
shank. Install mounting nut and
tighten by hand. Be sure that
faucet is positioned evenly on
the mounting surface. Make final
tightening of mounting nut with
mounting tool (supplied).
CAUTION: Be careful not
to pinch the LED Wire
when tightening the
faucet into place.
Select either low profile or high
profile spout to install (see page
5). Slide spout through spout nut with the flared side of the nut facing down.
Insert spout into valve body and thread nut onto valve body. Thread spout tip
onto spout and tighten.
INS412A HELPLINE: 1-877-DRINK-H2O
(1-877-374-6542)
6