Operating Instructions - Moen PureTouch AquaSuite 77100 Owner's Manual

OPERATING INSTRUCTIONS

Controlling the Water
Turn the handle on the valve body 1/4 turn clockwise to activate water flow.
Return valve to original position to shut off water flow.
CAUTION: Only filter cold water. Do not filter water above 100° F.
Electronic Indicator
The flashing light on the Filter Life Indicator Module provides information
regarding the performance of the filter. The indicator provides you with
information throughout the life of the filter. Only reset the indicator when
installing a new filter. Resetting the indicator at any other time will cause
incorrect filter life indication.
Indicator Color
New filter installation -
Amber & Green
Green/amber display
(flashing)
flashing for first 5 min. or
5 gal. of operation (0.7%
of life)
Normal operation - Green
Green
display flashing for 685
(flashing)
min. or 685 gal. of
operation (91.3% of life)
Filter nearing end of life -
Amber
Amber display flashing
(flashing)
for 60 min. or 60 gals. of
operation (8% of life)
End of filter life
Red (flashing)
The electronic indicator is powered by a replaceable, standard 3V lithium watch
battery (2032) and should last up to 2 years of normal operation.
INS412A HELPLINE: 1-877-DRINK-H2O
Meaning
A new filter must be flushed
with cold water for 5 minutes
after it is installed. This
procedure helps clean the filter
of loose carbon particles.
Filter performing at optimum
efficiency.
Caution: filter is ready for
replacement (less than 8% of
life left).
Filter life is depleted. Discard
old filter and replace with a
new MicroTech 9000.
(1-877-374-6542)
Performance
12