Advertisement
Power
Power Input – This product must be plugged into a Signature
or Diamond MSB power base with both analog and digital
supplies.
Features and Controls
This A/D is fully configurable with word lengths and bit depth adjustable up to with 32-bit output resolution, and sample rates up to
384 kHz. There are several grounding options that can be selected including complete isolation. Each input has a +24 db/- 181 db trim
adjustment and a full digital mixing of all 8 channels is possible, all with simple setup controls.
Front Panel Controls
Although the user interface is very simple and easy to use, in depth menus allow complete control of the DAC.
Menu Button – The square button is single purpose. It will enter the setup mode at the top of the menu tree. If in the setup,
and it doesn't matter where, this button will exit the setup, save the settings and return to the normal operational mode.
Right/Left Arrows – Used for navigation in the menu structure.
Star Button - The star button changes the sample rate.
Input/Volume Knob - The large knob will navigate up and down in the menu structure.
Display - The display shows the sample rate and bit depth. There is also a bar graph. The output meter is shown on the display. It's a
dual bar graph. One shows the average level and the other shows the peak level. Each line represents 2dB. It will display from 0dB
to -32dB in 2 dB steps. It shows all the input channels at the same time.
6
Power Base Connection Diagram
Advertisement
