Motorola MK3000 Product Reference Manual page 55

Select (hex image) COMPRESSION to reduce the size and speed up the download.
4.
Click and follow the on-screen instructions.
5. OK
If one of the partitions is the ESSID, a prompt appears requesting the ESSID value. Deselect the HR (High
Rate) check box when building ESSID images for a device with an FH radio.
Build ESSID Partition Window
Figure 5-10
If one of the partitions is the Splash Screen, a prompt appears requesting both the source Bitmap file and
the destination HEX file.
TCM performs a check, and if there are no errors, creates the partition hex files.
6.
If the build fails, TCM does not create the hex files and displays an error message. Two common reasons for a
build failure are:
•
TCM could not find the files defined in the script. This error can occur when the files referenced by the
script are no longer stored on the development computer or the folders where they are stored were
renamed.
•
The total amount of flash memory space that the script requires exceeds the image size. To correct this,
reduce the number of files in the partition or increase the size of the partition. See
Properties on page 5-10 for more information about setting the image size appropriately.
Application Deployment 5 - 13
Defining Script