Table of Contents
Advertisement
4.3.6 Configuration
Configuration
Click on
CONFIGURATION
http://192.168.1.200
Address
CONFIGURATION
Name UWTC-REC3
TCP Connections 1
Network ID 13106
Transmission Power Range 20dBm
Please refer to your local regulations for the allowed
maximum transmission power
Figure 4.14 Configuration
Network ID: The Personal Network ID (0 to 65535).
The Receiver always has an address of 0.
Channel: Choose the operation channel defined in IEEE 802.15.4 for the sensor
network.
Transmission Power: This determines the signal power transmitted by the Receiver.
The options are 10 dBm and 20 dBm.
Refer to your local regulations for the allowed maximum transmission power.
Save: Saves changes for Transmission Power.
Radio Reset: Power resets the radio module in the Receiver.
Radio Version: Firmware version of the radio module, also shown on model/serial label.
from the Home Page, the following page will appear.
Temperature C
Port 02000
Save
Channel 12
Save
Radio Reset
Radio Version x.x
Main Menu
Name: Receiver name
[maximum of 16 alphanumeric
characters]
Temperature: Unit of
temperature readings,
[ ºC or ºF ].
TCP Connections: Number of
TCP connections available for
data query. If "0" is selected
no TCP connection can be
made to the indicated port
number [ 0 through 5 ].
Port: Port number for TCP
connections. [invalid ports:
<500, >65536, 1000, 1001 ].
Save: Saves any changes for
above settings.
24
Advertisement
Table of Contents
