4.3 Receiver's Configurations and Operations
Using a web browser, you should be able to view the Receiver's homepage.
• Start your web browser.
• From the browser you type http://zxxxx using the last four-digits from the MAC
address label located on the device if DHCP and DNS are used. If a static IP address
is used, then simply type http://x.x.x.x, where x.x.x.x is the Receiver's IP address.
•
The Home Page, will be displayed.
In order to access certain menu items of the Home Page, users may be
prompted for a password, as shown in the two figures below.
LOGIN
http://192.168.1.200
LOGIN
Figure 4.6 LOGIN and ADMINISTRATOR Passwords
There are 2 different access levels:
1. ADMINISTRATOR Password (administrator) allows certain groups and individual users to
access and modify "entire" parameters without any restrictions.
The default password is 00000000. This password can be up to 16 alphanumeric case-
sensitive characters.
2. LOGIN Password (operator) allows users to access and modify all of the parameters,
except "Access Control" which requires an Administrator password.
The default password is 12345678. This password can be up to 16 alphanumeric
case-sensitive characters.
HOME PAGE
http://192.168.1.200
Address
WIRELESS SENSORS HOME PAGE
Readings
Diagnostic
Configuration
Figure 4.5 Wireless System Home Page Menu
Chart
Sensor Setup
Access Control
Firmware Version x.x
ADMINISTRATOR
http://192.168.1.200
ADMINISTRATOR
15