Diagnostic; Figure 4.13 Diagnostic - Omega Engineering UWTC-REC3 User Manual

4.3.5 Diagnostic

Diagnostic
Click on
Lab 50
Success 100%
Strength 84%
Update 10s
Battery 3.06V
Date and Time: Most recent time when data is received.
Save Current Graph: Save the current graph in PNG format. The filename has
extension .png.
Parameters Logging: Click to activate/deactivate parameters logging. When it is
activated, a file browser screen will allow you to name and save the logging file.
The file is in Comma Separated Value (.csv) format.
ACTIVE – parameters are currently being logged in the specified file.
INACTIVE – parameters logging is not activated.
Receiver (yellow box): Receiver is always at the top of the wireless network hierarchy
(star topology).
Sensor: Name of the sensor.
Success Rate: (0-100%), a low success rate indicates a longer data delay, shorter
battery lifetime and high network traffic. Any error message (LOST, OPEN) will be
shown here as well.
Radio Signal Strength: (0-100%), the higher the better.
The blue line and blue triangle (roof) connecting to the Receiver indicates the radio
signal strength. Darker blue means a stronger radio signal.
Dark Blue: between 100% and 79%; Medium Blue; 78% to 11%; Light Blue: 10% to 0%
Update Rate: The time interval the Receiver received data from the Connector /
Transmitter.
Battery Voltage: The total voltage of the battery in the Connector/Transmitter. Once
the voltage gets to 3.0V, it's recommended to change the battery (full battery is 3.6V).
The box (house) color indicates battery voltage. Green: >3.0V; Red: <3.0V
, the following page will appear.
Fri Jun 05 17:55:14 PDT 2009
Lab 100 CLN RM1
Success 100% Success 10%
Strength 79% Strength 9%
Update 10s Update 10s
Battery 3.21V Battery 3.08V

Figure 4.13 Diagnostic

CLN RM2 NODE-5
Success 100% Success 100%
Strength 77% Strength 89%
Update 10s Update 10s
Battery 3.14V Battery 2.34V
23