4.3.2 Get Readings from the Connector/Transmitter
Once you see the Connector/Transmitter's LED blinking periodically, it means it is
sending data which will appear on the "Readings" page. To view the data in a chart
format, you can use the "Chart" page.
Readings
Click on
Group to view the readings.
In a few seconds the following page will appear, showing updates of the Process and
Ambient Temperature.
from the Home Page, the following page will appear. Select the proper
READINGS
http://192.168.1.200
Address
READINGS: BY GROUPS
Group A
Group B
Group C
Group D
Figure 4.7 Select Readings by Groups
43.0
Figure 4.8 Readings
Wireless Sensors ID: 0 - 7
Wireless Sensors ID: 8 - 15
Wireless Sensors ID: 16 - 23
Wireless Sensors ID: 24 - 31
Sensor Setup
Main Menu
%
25.6
Refresh
5
seconds
17
Dew point
11.9