Step 3: Acquire Satellites - Garmin nuvi 205W series Quick Start Manual

Step 1: Mount Your nuvi
1. Plug the vehicle power cable into the back of your nuvi.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the suction cup
with a lint-free cloth. Remove the clear plastic from the
suction cup. Place the suction cup on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nuvi into the cradle.
6. Tilt your nuvi back until it snaps into place.
7. Plug the other end of the vehicle power cable into
a power outlet in your vehicle. Your unit should turn
on automatically if it is plugged in and the vehicle is
running.
8. If you are using a traffic receiver in Europe, connect the
external antenna to the traffic receiver and secure it to
the windshield using the suction cups. (Traffic receivers
are included in some nOvi 20SW series packages.)
Suction cup mount
Vehicle power
cable
Step 2: Configure Your nuvi
To
turn
your niivi on, slide the
6
Power key to the left. Follow the on-screen
instructions. To tum your niivi off, slide the
6
Power key to the left.
Step 3: Acquire Satellites
1. Go outdoors to an open area, away from tall buildings and trees.
2. Turn on your nuvi.
nOvi 205W series quick start manual
3