HP ProLiant BL465c Quickspecs page 17
Server blade
Hide thumbs
Also See for ProLiant BL465c:
- User manual (92 pages) ,
- Specification (39 pages) ,
- Installation instructions (3 pages)
Advertisement
QuickSpecs
Options
Ethernet Mezzanine
Ethernet Mezzanine
Ethernet Mezzanine
Ethernet Mezzanine
Options
Options
Options
Options
Fibre Channel Mezzanine
Fibre Channel Mezzanine
Fibre Channel Mezzanine
Fibre Channel Mezzanine
Options
Options
Options
Options
HP InfiniBand Mezzanine
HP InfiniBand Mezzanine
HP InfiniBand Mezzanine
HP InfiniBand Mezzanine
Options
Options
Options
Options
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem
NOTE:
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
NOTE:
NOTE:
connectivity will be provided on only 2 of the 4 ports.
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
NOTE:
NOTE:
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
NOTE:
connectivity will be provided on only 2 of the 4 ports.
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter for c-Class
BladeSystem
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
NOTE:
NOTE:
NOTE: The Gigabit Ethernet adapters above transmit from the server only at 2000
NOTE:
Mbps, full duplex per port. For more information, see the "Network Controller"
segment in the Standards Features section.
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: An NC512m network adapter card is required for each server blade
NOTE:
NOTE:
NOTE:
connecting to the HP 10Gb Ethernet BL-c Switch.
NOTE: The NC512m is supported in type II x8 PCI Express mezzanine slots;
NOTE:
NOTE:
NOTE:
maximum one adapter per server. For more information, see the Mezzanine Slot
Compatibility matrix within the HP NC512m Dual Port 10GbE Multifunction BL-c
Adapter QuickSpecs:
http://h18004.www1.hp.com/products/servers/networking/nc512m/index.html
NOTE:
NOTE: A minimum of 2 GB of server memory is required per NC512m and supports
NOTE:
NOTE:
a maximum of 32 GB for Windows and 64 GB for Linux.
NOTE:
NOTE:
NOTE: The NC512m adapter transmits from the server only at 20 Gbps, full duplex
NOTE:
per port.
HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade
NOTE:
NOTE:
NOTE:
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE:
NOTE:
NOTE:
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
NOTE:
NOTE:
NOTE:
connected to a Flex-10 enabled module and will link with all current 1Gb switches at
1Gb.
QLogic QMH4062 1Gb E iSCSI Adapter for HP BladeSystem c-Class
Emulex LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus Adapter
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
HP 4X DDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
HP 4X DDR IB Mezzanine HCA for HP BladeSystem c-Class
DA - 12578
Worldwide — Version 25 — October 31, 2008
HP ProLiant BL465c Server Blade
HP ProLiant BL465c Server Blade
HP ProLiant BL465c Server Blade
HP ProLiant BL465c Server Blade
416585-B21
406771-B21
445978-B21
447883-B21
406770-B21
453246-B21
440910-B21
467799-B21
488074-B21
403621-B21
403619-B21
448262-B21
410533-B21
Page 17
Advertisement
