HP ProLiant BL465c Quickspecs page 5

QuickSpecs
Standard Features
Network Controller Network Controller Network Controller Network Controller
Multifunction Networking The embedded multifunction NC370i combines standard Gigabit Ethernet networking, TCP/IP offload Multifunction Networking Multifunction Networking Multifunction Networking
I/O Expansion Slots I/O Expansion Slots I/O Expansion Slots I/O Expansion Slots
Integrated Manageability Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard) Integrated Manageability Integrated Manageability Integrated Manageability
Storage Controller Storage Controller Storage Controller Storage Controller
Maximum Internal Maximum Internal Maximum Internal Maximum Internal
Storage Storage Storage Storage
Graphics Graphics Graphics Graphics
Graphics Resolution Graphics Resolution Graphics Resolution Graphics Resolution
Supported Supported Supported Supported
Two (2) embedded NC370i Multifunction Gigabit Server Adapters
One (1) additional 10/100 server adapter dedicated to iLO 2 management
NOTE: The Gigabit Ethernet adapters transmit from the server only at 2000 Mbps, full duplex per port. NOTE: NOTE: NOTE:
However, within a Linux environment, the speed can be reduced or "throttled" using a feature available
within the Linux operating system; see the white paper at:
http://h71028.www7.hp.com/ERC/downloads/4AA1-5513ENW.pdf
Once the adapter signal reaches the interconnect within the blade enclosure and communicates outside
the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable
media, speed, duplex mode, and auto negotiation mode.
engine (TOE) acceleration, iSCSI boot, and optional accelerated iSCSI into a single adapter.
TOE moves the processing of data in the TCP protocol stack from the server CPU to the network
card, freeing CPU cycles for other activities. With TOE, network communications are improved,
and server efficiency is increased. The NC370i offers TOE for Microsoft® Windows environments.
The iSCSI network boot (iSCSI boot) allows the BL465c to boot from a remote operating system
(OS) image located on a storage area network (SAN) within a Microsoft Windows and Linux
environment. The BL465c uses an iSCSI firmware image (iSCSI boot option ROM) making the
remote disk drive appear as a local, bootable C: drive. The BL465c is configured to connect to
and boot from the iSCSI target disk on the network and download the OS image from the iSCSI
target disk. The iSCSI boot option ROM is supplied by HP at no cost. Additionally, the HP iSCSI
boot solution includes scripts to significantly simplify the installation process.
Two I/O expansion mezzanine slots (One x8 and one x4 PCI Express)
Smart Array E200i
Controller
Hot Plug Serial Attach
SCSI (SAS)
Hot Plug Serial ATA (SATA) 240GB SATA
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
Resolution Color Depths
DA - 12578 Worldwide — Version 25 — October 31, 2008
64MB memory module supports RAID 0,1
Available upgrades: 128MB with Battery-backed write cache
292GB SAS
Depths 1280 x 1024, 16.7M, 64k, 256.16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16,7M, 64k, 256, 16
640 x 480, 16,7M, 64k, 256, 16
HP ProLiant BL465c Server Blade HP ProLiant BL465c Server Blade HP ProLiant BL465c Server Blade HP ProLiant BL465c Server Blade
for more information.
2 x 146GB Serial Attached SCSI
2 x 120GB Serial ATA
Page 5