Cutting Height Adjustment Levers - Honda HRC216PDA Owner's Manual

Flywheel Brake Lever
This lever is connected to the engine flywheel brake and the engine
switch. The engine will not start or run unless this lever is held against
the handlebar.

Cutting Height Adjustment Levers

Each wheel of the mower can be adjusted to one of eight settings. The
cutting height figures are approximate. The actual height of cut grass
will vary with lawn and soil conditions.
REAR WHEEL
CONTROLS & FEATURES
FLYWHEEL BRAKE
LEVER
4 in (101 mm)
3-1/2 in (89 mm)
3 in (76 mm)
2-1/2 in (63 mm)
2 in (51 mm)
1-1/2 in (39 mm)
1 in (25 mm)
3/4 in (19 mm)
FRONT WHEEL
11