Install Ax2G4A/Ax4G Driver; Download The Driver From Atcom Download Center; Load The Files Via The U-Flash; Install The Driver - ATCOM AX4G Quick Start Manual

AX4G Quick Start Guide
1．Install ax2g4a/ax4g driver
1)

Download the driver from ATCOM download center

Notice:
Users should download the latest drivers for the GSM card from ATCOM download center:
http://www.atcom.cn/download.html
For example, users can get the driver with the command.
wget http://www.atcom.cn/cn/download/cards/ax4g/ax2g4a_ax4g_elastix2.4.0.tar.gz
2)

Load the files via the U-flash

Please plug the U-flash into the system. If the U-flash is detected by the server. Users need just
runt the commands to load the U-flash.
[root@localhost ~]# mount /media/
[root@localhost ~]# cd /media/
[root@localhost ~]# cp ax2g4a_elastix2.4.0.tar.gz /usr/src/
[root@localhost ~]# ls /usr/src/
[root@localhost ~]# umount /media/
3)

Install the driver

When users install the driver with elastix, users need just tar the package and run the script.
Normally, the script will install the driver automatically.
[root@localhost src]# tar -zxvf ax2g4a_elastix2.4.0.tar.gz
[root@localhost src]# cd ax2g4a_elastix2.4.0
[root@localhost elastix_ax2g4a_driver]# ./ax4g_install.sh
www.atcom.cn
; mount the U-flash
; unmount the U-flash
Email: support@atcomemail.com 1