Appendix: The Parameter For Billing - ATCOM AX4G Quick Start Manual

AX4G Quick Start Guide
3．Appendix: the parameter for billing
1．Two kinds of configuration for the billing.
1) If users need the GSM modules for billing, but the FXO needn't, please edit the configuration
files like the following:
a. Make sure the parameters is disabled in the "/etc/asterisk/chan_dahdi.conf" file.
;answeronpolarityswitch=yes
;polarityonanswerdelay= 300
b. Add the billing parameters into the "/etc/dahdi-channels.conf" file.
------------------------------------------------------------------------------------------
;;; line="1 WCTDM/6/0 FXSKS (In use) (SWEC: MG2)"
signalling=fxs_ks
answeronpolarityswitch=yes
polarityonanswerdelay= 300
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
------------------------------------------------------------------------------------------
Please add the parameters to the FXO module channels like the following:
------------------------------------------------------------------------------------------
;;; line="5 WCTDM/6/4 FXOKS (In use) (SWEC: MG2)"
signalling=fxo_ks
answeronpolarityswitch=no
callerid="Channel 5" <4005>
mailbox=4005
group=5
context=from-internal
channel => 5
callerid=
mailbox=
group=
context=default
------------------------------------------------------------------------------------------
www.atcom.cn Email: support@atcomemail.com 9