Honda HRA-21 Owner's Manual page 18

Cutting Height Adjustment
Six settings are available: S/8", l", l-1/2",2",2-1/2",3".
To change blade height:
1. Stop the engine.
2. Push the adjusting lever t&ward the wheel and
move it up or down to raise or lower the blade
height.
3. Release the lever in the appropriate notch.
4. Adjust the other three wheels. Make sure all four
wheels are at the same level.
-
* Be careful not to touch the muffler when adjust-
ing the right front wheel height.
The muffler wiN stay hot for a while after the en-
gine is stopped.
[CAUTION:
* Adiust all four wheels to the same level.
3"
lJ-===-F -w
ADJUSTING LEVER
16