Flight Check; Let's Fly - Brookstone u-Control Instruction Manual

flIGHt CHeCk

1. Make sure the CHANNEL SWITCH on your REMOTE matches the CHANNEL
INDICATOR on the nose of your helicopter. Example: If you have an "A" label on
the nose of the helicopter—move the CHANNEL SWITCH to A.
2. Move the helicopter's ON/OFF SWITCH on the helicopter's MAIN HOUSING
to ON and make sure the THROTTLE is in the down position.
3. Place helicopter on the floor, pointed away from you, spectators, pets and
breakable items.
4. Stand back, and move the REMOTE's power switch to ON.

let'S fly!

1. Increase the THROTTLE to full speed until the helicopter leaves the floor,
then back the THROTTLE off to approximately half-speed to maintain a steady
height while moving forward.
2. Use very slight right and left adjustments with the RIGHT/LEFT TURN
CONTROL to allow the helicopter to move to the right and left.
3. If your helicopter is heading for a collision with a spectator or hard object,
cut the THROTTLE to prevent damage.
4. Gentle and patient use of the controls will provide the most control of
the helicopter.
5. Have fun!
6